How to reset the service light / oil change message on a 2016 ford c-max. How to reset the service light / oil change message on a 2016 ford c-max.
Reset the entire system. If the low tire pressure warning light won’t turn off due to a glitch in the tire pressure monitoring system, it may be possible to reset the TPMS system by resetting all on-board computers in your Edge. This method should only be considered as a last resort, when all else fails. Time needed: 7 minutes. If you receive a low-tire pressure monitoring system (TPMS) warning light while driving and you want to clear or turning off the warning light on your Chrysler 300, follow these instructions: Make sure the vehicle is at a complete stop. Adjust the tire inflation pressure recommended on the tire placard located on the The tyre pressure monitoring system measures pressure in your road tyres and sends the tyre pressure readings to your vehicle. You can view the tyre pressure readings through the information display. The low tyre pressure warning light will turn on if the tyre pressure is significantly low. Once the light is illuminated, your tyres are underTPMS means tire pressure monitoring system. If your 2013 Ford C-Max has a tire pressure light that illuminates in the dashboard when you start your vehicle, it has TPMS sensors. The TPMS light should illuminate briefly when you start your car, but then turn off afterwards. If your tire pressure light keeps coming on or the tire pressure light
If your car has a Smart key button, press once to turn on, then press again to put the vehicle into ACC mode, then press again to turn the vehicle off. Repeat 2 more times, ending in ACC mode. Press the brake pedal again for 2 seconds, then release. Turn the ignition to OFF position (DO NOT remove the key) tGCCwFF.